TPS51116RGER
- Created at: 2023-11-08 08:10:15 , by WikiIC
- Updated at: 2023-11-08 08:10:15
- Views: 6
TPS51116RGER
Product Overview
Category
The TPS51116RGER belongs to the category of integrated circuits (ICs) and specifically falls under the voltage regulators category.
Use
This IC is primarily used as a synchronous buck controller for point-of-load (POL) applications. It provides high-efficiency power conversion for various electronic devices.
Characteristics
- Synchronous buck controller
- High-efficiency power conversion
- Suitable for POL applications
- Compact package size
- Wide input voltage range
- Adjustable output voltage
- Overcurrent protection
- Thermal shutdown protection
Package and Quantity
The TPS51116RGER is available in a small outline integrated circuit (SOIC) package. It is supplied in tape and reel packaging, with a quantity of 2500 units per reel.
Specifications
- Input Voltage Range: 4.5V to 18V
- Output Voltage Range: 0.6V to VIN
- Maximum Output Current: 20A
- Switching Frequency: 300kHz to 1MHz
- Operating Temperature Range: -40°C to 85°C
- Package Type: SOIC-20
Pin Configuration
The TPS51116RGER has a total of 20 pins. The pin configuration is as follows:
- VIN: Input voltage
- PGND: Power ground
- BOOT: Bootstrap capacitor connection
- PHASE: Phase node connection
- VDRV: Gate driver supply voltage
- AGND: Analog ground
- FB: Feedback voltage
- COMP: Compensation network connection
- SS/TR: Soft-start/Tracking control
- EN: Enable control
- RT/CLK: Oscillator resistor or external clock input
- SYNC: External synchronization input
- VCC: Supply voltage
- VSENSE: Current sense input
- ISET: Output current limit setting
- SS/TR: Soft-start/Tracking control
- PGND: Power ground
- SW: Switch node connection
- SW: Switch node connection
- VIN: Input voltage
Functional Features
The TPS51116RGER offers several functional features that enhance its performance and usability:
- Synchronous rectification: The IC utilizes synchronous rectification to minimize power losses and improve efficiency.
- Adjustable output voltage: The output voltage can be easily adjusted according to the specific requirements of the application.
- Overcurrent protection: The IC incorporates overcurrent protection to safeguard against excessive current flow, preventing damage to the device and connected components.
- Thermal shutdown protection: In case of excessive temperature rise, the IC automatically shuts down to prevent overheating and potential damage.
Advantages and Disadvantages
Advantages
- High-efficiency power conversion
- Wide input voltage range
- Compact package size
- Overcurrent and thermal protection
- Adjustable output voltage
Disadvantages
- Limited maximum output current (20A)
- Requires external components for complete functionality
Working Principles
The TPS51116RGER operates as a synchronous buck controller. It regulates the output voltage by controlling the duty cycle of the internal power switches. The input voltage is stepped down to the desired output voltage using high-frequency switching techniques. The IC continuously monitors the output voltage and adjusts the duty cycle accordingly to maintain a stable output.
Detailed Application Field Plans
The TPS51116RGER finds applications in various fields, including but not limited to: - Computer motherboards - Graphics cards - Industrial equipment - Telecommunications devices - Consumer electronics
Alternative Models
For those seeking alternative options, the following models can be considered: - TPS51117RGER - TPS51118RGER - TPS51119RGER
These models offer similar functionality and characteristics, providing flexibility in choosing the most suitable option for specific applications.
In conclusion, the TPS51116RGER is a synchronous buck controller IC designed for high-efficiency power conversion in point-of-load applications. With its adjustable output voltage, overcurrent protection, and compact package size, it offers several advantages for various electronic devices. However, it has limitations in terms of maximum output current and requires external components for complete functionality. Its working principle involves regulating the output voltage by controlling the duty cycle of internal power switches. The IC finds applications in computer motherboards, graphics cards, industrial equipment, telecommunications devices, and consumer electronics. Alternative models such as TPS51117RGER, TPS51118RGER, and TPS51119RGER can also be considered for similar requirements.
List 10 common questions and answers related to the application of TPS51116RGER in technical solutions
Sure! Here are 10 common questions and answers related to the application of TPS51116RGER in technical solutions:
1. What is TPS51116RGER? - TPS51116RGER is a voltage regulator IC (integrated circuit) designed for power management applications.
2. What is the input voltage range of TPS51116RGER? - The input voltage range of TPS51116RGER is typically between 4.5V and 28V.
3. What is the output voltage range of TPS51116RGER? - The output voltage range of TPS51116RGER can be adjusted from 0.6V to 5.5V.
4. What is the maximum output current of TPS51116RGER? - The maximum output current of TPS51116RGER is typically around 3A.
5. Can TPS51116RGER be used in battery-powered applications? - Yes, TPS51116RGER can be used in battery-powered applications as it has a wide input voltage range and supports low-power operation.
6. Does TPS51116RGER have built-in protection features? - Yes, TPS51116RGER includes various protection features such as overcurrent protection, thermal shutdown, and undervoltage lockout.
7. Is TPS51116RGER suitable for use in automotive applications? - Yes, TPS51116RGER is suitable for use in automotive applications as it meets the necessary automotive standards and has a wide operating temperature range.
8. Can TPS51116RGER be used in both step-up and step-down voltage conversion? - No, TPS51116RGER is primarily designed for step-down (buck) voltage conversion applications.
9. What is the typical efficiency of TPS51116RGER? - The typical efficiency of TPS51116RGER can be as high as 95% depending on the input and output voltage conditions.
10. Does TPS51116RGER require any external components for operation? - Yes, TPS51116RGER requires a few external components such as input/output capacitors and inductors to function properly.
Please note that these answers are general and may vary depending on specific application requirements and design considerations.
- https://chipmlcc.ru/product/details/texas-instruments/tps51116rger-4904119.html [PDF download, circuit diagram, pin configuration, detailed specifications, and more electronic component spot channels.]
- https://www.chipmlcc.com/product/details/texas-instruments/tps51116rger-4904119.html [PDF download, circuit diagram, pin configuration, detailed specifications, and more electronic component spot channels.]
- Audio Special Purpose
- Clock/Timing - Application Specific
- Clock/Timing - Clock Buffers, Drivers
- Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers
- Clock/Timing - Delay Lines
- Clock/Timing - IC Batteries
- Clock/Timing - Programmable Timers and Oscillators
- Clock/Timing - Real Time Clocks
- Data Acquisition - ADCs/DACs - Special Purpose
- Data Acquisition - Analog Front End (AFE)
- Data Acquisition - Analog to Digital Converters (ADC)
- Data Acquisition - Digital Potentiometers
- Data Acquisition - Digital to Analog Converters (DAC)
- Data Acquisition - Touch Screen Controllers
- Embedded - CPLDs (Complex Programmable Logic Devices)
- Embedded - DSP (Digital Signal Processors)
- Embedded - FPGAs (Field Programmable Gate Array)
- Embedded - FPGAs (Field Programmable Gate Array) with Microcontrollers
- Embedded - Microcontroller, Microprocessor, FPGA Modules
- Embedded - Microcontrollers
- Embedded - Microcontrollers - Application Specific
- Embedded - Microprocessors
- Embedded - PLDs (Programmable Logic Device)
- Embedded - System On Chip (SoC)
- Interface - Analog Switches - Special Purpose
- Interface - Analog Switches, Multiplexers, Demultiplexers
- Interface - CODECs
- Interface - Controllers
- Interface - Direct Digital Synthesis (DDS)
- Interface - Drivers, Receivers, Transceivers
- Interface - Encoders, Decoders, Converters
- Interface - Filters - Active
- Interface - I/O Expanders
- Interface - Modems - ICs and Modules
- Interface - Modules
- Interface - Sensor and Detector Interfaces
- Interface - Sensor, Capacitive Touch
- Interface - Serializers, Deserializers
- Interface - Signal Buffers, Repeaters, Splitters
- Interface - Signal Terminators
- Interface - Specialized
- Interface - Telecom
- Interface - UARTs (Universal Asynchronous Receiver Transmitter)
- Interface - Voice Record and Playback
- Linear - Amplifiers - Audio
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
- Linear - Amplifiers - Special Purpose
- Linear - Amplifiers - Video Amps and Modules
- Linear - Analog Multipliers, Dividers
- Linear - Comparators
- Linear - Video Processing
- Logic - Buffers, Drivers, Receivers, Transceivers
- Logic - Comparators
- Logic - Counters, Dividers
- Logic - FIFOs Memory
- Logic - Flip Flops
- Logic - Gates and Inverters
- Logic - Gates and Inverters - Multi-Function, Configurable
- Logic - Latches
- Logic - Multivibrators
- Logic - Parity Generators and Checkers
- Logic - Shift Registers
- Logic - Signal Switches, Multiplexers, Decoders
- Logic - Specialty Logic
- Logic - Translators, Level Shifters
- Logic - Universal Bus Functions
- Memory
- Memory - Batteries
- Memory - Configuration Proms for FPGAs
- Memory - Controllers
- PMIC - AC DC Converters, Offline Switchers
- PMIC - Battery Chargers
- PMIC - Battery Management
- PMIC - Current Regulation/Management
- PMIC - Display Drivers
- PMIC - Energy Metering
- PMIC - Full, Half-Bridge Drivers
- PMIC - Gate Drivers
- PMIC - Hot Swap Controllers
- PMIC - Laser Drivers
- PMIC - LED Drivers
- PMIC - Lighting, Ballast Controllers
- PMIC - Motor Drivers, Controllers
- PMIC - OR Controllers, Ideal Diodes
- PMIC - PFC (Power Factor Correction)
- PMIC - Power Distribution Switches, Load Drivers
- PMIC - Power Management - Specialized
- PMIC - Power Over Ethernet (PoE) Controllers
- PMIC - Power Supply Controllers, Monitors
- PMIC - RMS to DC Converters
- PMIC - Supervisors
- PMIC - Thermal Management
- PMIC - V/F and F/V Converters
- PMIC - Voltage Reference
- PMIC - Voltage Regulators - DC DC Switching Controllers
- PMIC - Voltage Regulators - DC DC Switching Regulators
- PMIC - Voltage Regulators - Linear
- PMIC - Voltage Regulators - Linear + Switching
- PMIC - Voltage Regulators - Linear Regulator Controllers
- PMIC - Voltage Regulators - Special Purpose
- Specialized ICs
- ClockTiming - Application Specific
- ClockTiming - Clock Buffers, Drivers
- ClockTiming - Clock Generators, PLLs, Frequency Synthesizers
- ClockTiming - Delay Lines
- ClockTiming - IC Batteries
- ClockTiming - Programmable Timers and Oscillators
- ClockTiming - Real Time Clocks
- Data Acquisition - ADCsDACs - Special Purpose
- Embedded - Microcontroller or Microprocessor Modules
- Interface - IO Expanders
- PMIC - Current RegulationManagement
- PMIC - VF and FV Converters
- PMIC - Voltage Regulators - Linear Transistor Driver