MAX8804ZETA+T
- Created at: 2023-10-22 18:42:18 , by WikiIC
- Updated at: 2023-10-22 18:42:18
- Views: 405
MAX8804ZETA+T
Product Overview
- Category: Integrated Circuit (IC)
- Use: Power Management
- Characteristics: High Efficiency, Low Quiescent Current, Small Package Size
- Package: 8-pin TDFN (Thin Dual Flat No-Lead) Package
- Essence: Voltage Regulator
- Packaging/Quantity: Tape and Reel, 2500 units per reel
Specifications
- Input Voltage Range: 2.7V to 5.5V
- Output Voltage Range: 1.2V to 3.3V
- Maximum Output Current: 300mA
- Dropout Voltage: 120mV at 100mA
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
The MAX8804ZETA+T has the following pin configuration:
- VIN: Input Voltage
- GND: Ground
- EN: Enable Pin
- FB: Feedback Pin
- VOUT: Output Voltage
- SW: Switching Node
- PG: Power Good Indicator
- VCC: Supply Voltage
Functional Features
- High Efficiency: The MAX8804ZETA+T utilizes a high-efficiency voltage regulator, ensuring minimal power loss during operation.
- Low Quiescent Current: With a low quiescent current of only 30µA, the MAX8804ZETA+T minimizes power consumption in standby or idle modes.
- Small Package Size: The 8-pin TDFN package allows for compact designs, making it suitable for space-constrained applications.
Advantages and Disadvantages
Advantages: - High efficiency results in reduced power consumption. - Low quiescent current prolongs battery life. - Small package size enables compact designs.
Disadvantages: - Limited maximum output current of 300mA may not be suitable for high-power applications. - Dropout voltage of 120mV at 100mA may affect performance in low input voltage scenarios.
Working Principles
The MAX8804ZETA+T is a voltage regulator that takes an input voltage within the range of 2.7V to 5.5V and provides a regulated output voltage between 1.2V and 3.3V. It achieves this by utilizing a switching regulator topology, which allows for high efficiency and reduced power loss. The regulator operates by continuously adjusting the duty cycle of the internal switch to maintain the desired output voltage, even with varying input voltages.
Detailed Application Field Plans
The MAX8804ZETA+T finds applications in various fields, including but not limited to:
- Portable Electronics: It can be used to regulate the voltage for portable devices such as smartphones, tablets, and portable media players.
- IoT Devices: The low quiescent current and small package size make it suitable for powering IoT devices that require long battery life and compact form factors.
- Wearable Technology: The small package size and efficient power management capabilities make it ideal for wearable devices like smartwatches and fitness trackers.
- Industrial Applications: The voltage regulator can be employed in industrial equipment that requires stable and efficient power supply.
Detailed and Complete Alternative Models
- MAX8805ZETA+T: Similar to MAX8804ZETA+T, but with a higher maximum output current of 500mA.
- MAX8806ZETA+T: A voltage regulator with similar characteristics, but designed for lower input voltage ranges (1.8V to 5.5V).
- MAX8807ZETA+T: Offers a wider output voltage range (0.8V to 5.5V) compared to MAX8804ZETA+T.
These alternative models provide flexibility in choosing a voltage regulator based on specific requirements and constraints.
Word count: 410 words
List 10 common questions and answers related to the application of MAX8804ZETA+T in technical solutions
Sure! Here are 10 common questions and answers related to the application of MAX8804ZETA+T in technical solutions:
Q: What is the MAX8804ZETA+T? A: The MAX8804ZETA+T is a voltage regulator IC designed for use in various technical solutions.
Q: What is the input voltage range of the MAX8804ZETA+T? A: The input voltage range of the MAX8804ZETA+T is typically between 2.7V and 5.5V.
Q: What is the output voltage range of the MAX8804ZETA+T? A: The output voltage range of the MAX8804ZETA+T can be adjusted from 0.6V to 3.3V.
Q: What is the maximum output current of the MAX8804ZETA+T? A: The maximum output current of the MAX8804ZETA+T is typically around 300mA.
Q: Can the MAX8804ZETA+T operate in a wide temperature range? A: Yes, the MAX8804ZETA+T is designed to operate in a wide temperature range, typically from -40°C to +85°C.
Q: Does the MAX8804ZETA+T have built-in protection features? A: Yes, the MAX8804ZETA+T includes overcurrent protection, thermal shutdown, and undervoltage lockout features.
Q: Can the MAX8804ZETA+T be used in battery-powered applications? A: Yes, the low quiescent current and wide input voltage range make it suitable for battery-powered applications.
Q: Is the MAX8804ZETA+T available in a small package? A: Yes, the MAX8804ZETA+T is available in a compact 6-pin SOT23 package.
Q: Can the output voltage of the MAX8804ZETA+T be adjusted externally? A: Yes, the output voltage can be adjusted using external resistors connected to the feedback pin.
Q: What are some typical applications for the MAX8804ZETA+T? A: The MAX8804ZETA+T is commonly used in portable devices, IoT applications, and other low-power electronic systems.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.
- https://chipmlcc.ru/product/details/maxim-integrated/max8804zeta-t.html [PDF download, circuit diagram, pin configuration, detailed specifications, and more electronic component spot channels.]
- https://www.chipmlcc.com/product/details/maxim-integrated/max8804zeta-t.html [PDF download, circuit diagram, pin configuration, detailed specifications, and more electronic component spot channels.]
- Audio Special Purpose
- Clock/Timing - Application Specific
- Clock/Timing - Clock Buffers, Drivers
- Clock/Timing - Clock Generators, PLLs, Frequency Synthesizers
- Clock/Timing - Delay Lines
- Clock/Timing - IC Batteries
- Clock/Timing - Programmable Timers and Oscillators
- Clock/Timing - Real Time Clocks
- Data Acquisition - ADCs/DACs - Special Purpose
- Data Acquisition - Analog Front End (AFE)
- Data Acquisition - Analog to Digital Converters (ADC)
- Data Acquisition - Digital Potentiometers
- Data Acquisition - Digital to Analog Converters (DAC)
- Data Acquisition - Touch Screen Controllers
- Embedded - CPLDs (Complex Programmable Logic Devices)
- Embedded - DSP (Digital Signal Processors)
- Embedded - FPGAs (Field Programmable Gate Array)
- Embedded - FPGAs (Field Programmable Gate Array) with Microcontrollers
- Embedded - Microcontroller, Microprocessor, FPGA Modules
- Embedded - Microcontrollers
- Embedded - Microcontrollers - Application Specific
- Embedded - Microprocessors
- Embedded - PLDs (Programmable Logic Device)
- Embedded - System On Chip (SoC)
- Interface - Analog Switches - Special Purpose
- Interface - Analog Switches, Multiplexers, Demultiplexers
- Interface - CODECs
- Interface - Controllers
- Interface - Direct Digital Synthesis (DDS)
- Interface - Drivers, Receivers, Transceivers
- Interface - Encoders, Decoders, Converters
- Interface - Filters - Active
- Interface - I/O Expanders
- Interface - Modems - ICs and Modules
- Interface - Modules
- Interface - Sensor and Detector Interfaces
- Interface - Sensor, Capacitive Touch
- Interface - Serializers, Deserializers
- Interface - Signal Buffers, Repeaters, Splitters
- Interface - Signal Terminators
- Interface - Specialized
- Interface - Telecom
- Interface - UARTs (Universal Asynchronous Receiver Transmitter)
- Interface - Voice Record and Playback
- Linear - Amplifiers - Audio
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
- Linear - Amplifiers - Special Purpose
- Linear - Amplifiers - Video Amps and Modules
- Linear - Analog Multipliers, Dividers
- Linear - Comparators
- Linear - Video Processing
- Logic - Buffers, Drivers, Receivers, Transceivers
- Logic - Comparators
- Logic - Counters, Dividers
- Logic - FIFOs Memory
- Logic - Flip Flops
- Logic - Gates and Inverters
- Logic - Gates and Inverters - Multi-Function, Configurable
- Logic - Latches
- Logic - Multivibrators
- Logic - Parity Generators and Checkers
- Logic - Shift Registers
- Logic - Signal Switches, Multiplexers, Decoders
- Logic - Specialty Logic
- Logic - Translators, Level Shifters
- Logic - Universal Bus Functions
- Memory
- Memory - Batteries
- Memory - Configuration Proms for FPGAs
- Memory - Controllers
- PMIC - AC DC Converters, Offline Switchers
- PMIC - Battery Chargers
- PMIC - Battery Management
- PMIC - Current Regulation/Management
- PMIC - Display Drivers
- PMIC - Energy Metering
- PMIC - Full, Half-Bridge Drivers
- PMIC - Gate Drivers
- PMIC - Hot Swap Controllers
- PMIC - Laser Drivers
- PMIC - LED Drivers
- PMIC - Lighting, Ballast Controllers
- PMIC - Motor Drivers, Controllers
- PMIC - OR Controllers, Ideal Diodes
- PMIC - PFC (Power Factor Correction)
- PMIC - Power Distribution Switches, Load Drivers
- PMIC - Power Management - Specialized
- PMIC - Power Over Ethernet (PoE) Controllers
- PMIC - Power Supply Controllers, Monitors
- PMIC - RMS to DC Converters
- PMIC - Supervisors
- PMIC - Thermal Management
- PMIC - V/F and F/V Converters
- PMIC - Voltage Reference
- PMIC - Voltage Regulators - DC DC Switching Controllers
- PMIC - Voltage Regulators - DC DC Switching Regulators
- PMIC - Voltage Regulators - Linear
- PMIC - Voltage Regulators - Linear + Switching
- PMIC - Voltage Regulators - Linear Regulator Controllers
- PMIC - Voltage Regulators - Special Purpose
- Specialized ICs
- ClockTiming - Application Specific
- ClockTiming - Clock Buffers, Drivers
- ClockTiming - Clock Generators, PLLs, Frequency Synthesizers
- ClockTiming - Delay Lines
- ClockTiming - IC Batteries
- ClockTiming - Programmable Timers and Oscillators
- ClockTiming - Real Time Clocks
- Data Acquisition - ADCsDACs - Special Purpose
- Embedded - Microcontroller or Microprocessor Modules
- Interface - IO Expanders
- PMIC - Current RegulationManagement
- PMIC - VF and FV Converters
- PMIC - Voltage Regulators - Linear Transistor Driver